Coalescing Filters

Product Details:

Available In C and V series also.

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum

Additional Information:

• Item Code: MARKG48
• Production Capacity: 75-175 CFM
• Delivery Time: READY STOCK
• Packaging Details: CARTEN PACKING

Available In C and V series also.

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum

Available In C and V series also.

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum

Available In C and V series also.

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum

Available In C and V series also.

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum

Available In C and V series also.

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum

Available In C and V series also.

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum

Available In C and V series also.

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum

Available In C and V series also.

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum